With 650 W on tap, this PSU has room for a typical desktop setup, from a mid-range graphics card to several drives and fans. That spare capacity means the unit isn't constantly pushed to its limit, and it leaves some room for a future component upgrade without having to swap the power supply straight away.
The 80 PLUS Bronze certification confirms the unit meets a recognised efficiency standard, so more of the power drawn from the wall reaches your components instead of being lost as heat. Over months of daily use, that adds up to more sensible energy consumption and less heat building up inside the case.
A 120 mm fan handles cooling, while the standard ATX form factor fits the vast majority of desktop cases built for ATX power supplies. The non-modular design means every cable comes permanently attached, so there are no separate leads to lose and installation is simple. The black finish blends neatly into most builds.
This power supply suits home users building a new desktop, gamers putting together a mid-range rig and anyone replacing a tired or underpowered PSU in an existing ATX case. It's also a sensible pick for office and family PCs where reliable, efficient power matters more than extra features.
| Brand | BE QUIET |
|---|---|
| Product colour | Black |
| Purpose | PC |
| Hold time | 17.04 |
| Efficiency | 89.7 |
| ATX version | 3.1 |
| EPS version | 2.92 |
| Cabling type | Non-Modular |
| Fan diameter | 120 |
| Number of fans | 1 |
| Number of +12V rail(s) | 1 |
| Shipping (inner) case width | 311 |
| Shipping (inner) case height | 218 |
| Shipping (inner) case length | 556 |
| Mean time between failures (MTBF) | 100000 |
| Products per shipping (inner) case | 6 |
| Shipping (inner) case gross weight | 15200 |
| Waste Electrical and Electronic Equipment (WEEE) compliance | Yes |
| Warranty | 24 months |
| EAN | 4260052191873 |
| CPU P4 connector (4-pin) | 1 |
|---|---|
| CPU power connector (4+4 pin) | Yes |
| Motherboard power connector | 20+4 pin ATX |
|---|---|
| Number of SATA power connectors | 5 |
| PCI Express power connectors (12-pin) | 1 |
| PCI Express power connectors (6+2 pin) | 2 |
| Peripheral (Molex) power connectors (4-pin) | 1 |
| On/off switch | Yes |
|---|
| AC input voltage | 200 – 240 V |
|---|---|
| AC input frequency | 50 Hz |
| Total power | 650 |
| Power factor | 0.98 |
| Input current | 4 |
| Combined power (+5V) | 120 |
| 80 PLUS certification | 80 PLUS Bronze |
| Combined power (+12V) | 650 |
| Combined power (-12V) | 3.6 |
| Combined power (+3.3V) | 120 |
| Combined power (+5Vsb) | 15 |
| Max output current (+5V) | 20 |
| Max output current (-12V) | 0.3 |
| Power protection features | Over current/Over power/Over voltage/Overheating/Short circuit/Surge & inrush/Under voltage |
| Max output current (+12V1) | 54.17 |
| Max output current (+3.3V) | 20 |
| Max output current (+5Vsb) | 3 |
| Power supply unit (PSU) form factor | ATX |
| Noise level | 30.9 dB |
|---|---|
| Fan speed | 0 - 2100 |
| Cooling type | Active |
| Package type | Box |
|---|---|
| Screws included | Yes |
| Bearing technology | Rifle |
| Cable ties included | Yes |
| Sustainability certificates | ENERGY STAR/ErP |
| Width | 150 mm |
|---|---|
| Depth | 86 mm |
| Height | 140 mm |
| Weight | 1.97 kg |
| Product Net Weight | 1.97 kg |
It uses the standard ATX form factor, so it suits cases designed for ATX power supplies. The manufacturer does not list exact dimensions in the specifications provided.
No. This is a non-modular unit, so all cables are permanently attached.
It delivers 650 W and carries 80 PLUS Bronze certification.