UBIQUITI

UBIQUITI Pro XG 8 PoE Managed Switch, 8x 10G PoE++ Ports, 2x SFP+

The UBIQUITI Pro XG 8 PoE (USW-PRO-XG-8-POE) is a managed L2/L3 network switch with eight 10G copper ports and two SFP+ slots, offering great value for anyone building a fast, PoE-powered network. It delivers data and power over a single cable, so your cabling stays simple.

  • Switch type: Managed, L2/L3
  • LAN ports: 8x RJ-45
  • LAN speed: 10G Ethernet (100/1000/10000)
  • SFP+ slots: 2
  • PoE: Yes, 8 ports with 4PPoE (PoE++)
  • PoE budget: 155 W total
  • Rack mount: No

Description

8 copper ports with 10G Ethernet speeds

All eight RJ-45 ports support 10G Ethernet and negotiate 100, 1000 or 10000 Mbps. That means older gigabit devices and newer 10G hardware can share the same switch. It is a practical way to speed up transfers between workstations, servers and storage on a wired network.

2 SFP+ slots for fibre or extra uplinks

Two SFP+ module slots give you room to extend the network beyond copper. They suit uplinks to another switch or a connection to a device that uses an SFP+ module. The specs do not list which modules are included, so check compatibility before you buy.

8 PoE++ ports with a 155 W budget

Every one of the eight copper ports supports 4PPoE (PoE++), so compatible devices such as access points or cameras can draw power straight from the switch. The total PoE budget is 155 W, shared across all connected devices. Add up the needs of your gear to make sure it fits within that limit.

Managed L2/L3 switching for more control

As a managed switch with Layer 2 and Layer 3 capability, it gives you more control over how traffic moves through your network than an unmanaged model. This helps when you want to organise devices and tailor the setup to your needs. The manufacturer's specs here do not detail individual software features.

One cable for power and data

With PoE on every copper port, you can place powered devices where they work best rather than where a power socket happens to be. That reduces the number of adapters and cables to manage, and keeps installations tidier in offices, workshops or home labs.

Desktop-ready, no rack mount listed

The specs state that this model is not a rack-mount switch. It is therefore best suited to a shelf, desk or similar surface. If you need a rack installation, check with the manufacturer about suitable mounting options, as none are listed here.

Who the Pro XG 8 PoE suits

This switch fits small businesses, advanced home users and network enthusiasts who want 10G speeds, PoE++ power and managed features in one device. It is a sensible fit if you are connecting powered devices alongside fast computers or storage, and want a good price for that combination.

Specifications

General

BrandUBIQUITI
Model namePro XG 8 PoE
Product colourGrey
Housing materialSGCC
ManualYes
Throughput100
IPv4 routes12000
Static routeYes
IGMP snoopingYes
Rack mountingNo
Rate limitingYes
Wall mountableYes
Forwarding rate149
Number of VLANs1000
Link aggregationYes
MAC address table32000
Packet buffer memory2
Broadcast storm controlYes
SFP+ module slots quantity2
Operating relative humidity (H-H)10 - 90
Warranty12 months
EAN810177160144

Storage

Switching capacity200

Ports

Power over Ethernet (PoE)Yes
Port mirroringYes
Power connectorDC-in jack
Virtual LAN featuresInterface-based VLAN/Voice VLAN
10G Ethernet (copper) ports quantity8
Total Power over Ethernet (PoE) budget155
Power over Ethernet (PoE) power per port15.4
Power over Ethernet (PoE) type supportedPoE++ (4PPoE)
Basic switching RJ-45 Ethernet ports type10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity8
Power over Ethernet 4PPoE (PoE++) ports quantity8

Keyboard & controls

Switch typeManaged
Reset buttonYes
Switch layerL2/L3

Battery & power

Power consumption (max)220 W
Power sourceAC/DC
Power supply includedYes

Performance & capacities

Operating temperature (T-T)0 – 5 – 40 °C

Features

Cables includedPower
LED indicatorsSystem
10G supportYes
VLAN supportYes
DHCP featuresDHCP guarding/DHCP relay/DHCP server/DHCPv6 snooping
Loop protectionYes
Multicast supportYes
Flow control supportYes
Jumbo frames supportYes
Quality of Service (QoS) supportYes

Dimensions & weight

Width210.4 mm
Depth173.8 mm
Height43.7 mm
Weight1.6 kg
Product Net Weight1.6 kg

Questions & answers

Does it support PoE?

Yes. All eight copper ports support 4PPoE (PoE++), with a total PoE budget of 155 W.

How many 10G ports does it have?

It has eight 10G Ethernet copper ports, plus two SFP+ slots.

Is it a managed switch?

Yes, it is a managed switch with L2/L3 capability.

Can I mount it in a rack?

The specs list rack mounting as No, so it is intended for non-rack use.

Does it work with gigabit devices?

Yes. The RJ-45 ports support 100, 1000 and 10000 Mbps speeds, so slower devices can connect too.

UBIQUITI Pro XG 8 PoE Managed Switch, 8x 10G PoE++ Ports, 2x SFP+ | mydeal.ee